Filter
Top Products
ES-2024 Series User’s Guide
Chapter 8 VLAN 86
Port-based VLANs are specific only to the switch on which they were created.
Note: When you activate port-based VLAN, the switch uses a default VLAN ID of 1.
You cannot change it.
In screens (such as IP Setup and Filtering) that require a VID, you must enter
1 as the VID.
The port-based VLAN setup screen is shown next. The CPU management port forms a VLAN
with all Ethernet ports.
8.6.1 Configure a Port-based VLAN
Select Port Based as the VLAN Type in the Switch Setup screen (see Figure 33 on page 81)
and then click VLAN from the navigation panel to display the next screen.
Figure 38 Port Based VLAN Setup (All Connected)