Filter
Top Products
ZyXEL G-220F User’s Guide
19 Chapter 1 Getting Started
Figure 1 Application: Infrastructure
1.1.1.2 Ad-Hoc
In case you prefer to set up a small independent wireless workgroup without an AP, use the
Ad-Hoc mode.
Ad-hoc mode does not require an AP or a wired network. Two or more wireless clients
communicate directly to each other.
Figure 2 Application: Ad-Hoc
1.1.1.3 Access Point Mode
You can set the ZyXEL G-220F in access point mode. The following figure shows a network
example.
Figure 3 Application: Access Point Mode
In the example, the ZyXEL G-220F is installed on computer A and set to operate in access
point mode. Computer A shares Internet connection to the wireless LAN, so wireless stations
B and C can access the Internet.