ZyXEL Communications G-270S Network Card User Manual


 
ZyXEL G-270S User’s Guide
46 Chapter 3 ZyXEL Utility Configuration
2 If you select the Infrastructure network type in the previous screen, skip to step 3. If you
select the Ad-Hoc network type in the previous screen, a screen displays as follows.
Select a channel number and click Next to continue.
Figure 20 Profile: Wireless Setting: Select a Channel
The following table describes the labels in this screen.
,
,
or
denotes that the wireless device is in infrastructure mode and the wireless
security is activated.
denotes that the wireless device is in infrastructure mode but the wireless
security is deactivated.
denotes that the wireless device is in Ad-Hoc mode and the wireless
security is activated.
denotes that the wireless device is in Ad-Hoc mode but the wireless security
is deactivated.
SSID This field displays the SSID (Service Set IDentifier) of each wireless device.
Scan Click Scan to search for available wireless devices within transmission range.
Select Select an available wireless device in the table and click Select to add it to this
profile.
Whenever you activate this profile, the ZyXEL G-270S associates to the selected
wireless network only.
Table 13 Profile: Wireless Setting: Select a Channel
LABEL DESCRIPTION
Wireless Setting
Channel Select a channel number from the drop-down list box. To associate to an ad-hoc
network, you must use the same channel as the peer computer.
Back Click Back to return to the Add New Profile screen.
Table 12 Profile: Add New Profile (continued)
LABEL DESCRIPTION