Filter
Top Products
ZyXEL G-270S User’s Guide
Chapter 3 ZyXEL Utility Configuration 49
Figure 24 Profile: Activate the Profile
3.4 The Adapter Screen
To set the advanced features on the ZyXEL G-270S, click the Adapter tab.
Figure 25 Adapter Screen
The following table describes the labels in this screen.
Table 14 Adapter
LABEL DESCRIPTION
Adapter Setting
Transfer Rate Select a transfer speed from the drop-down list box. Choose from Fully Auto
(default), 1 Mbps, 2 Mbps, 5.5 Mbps, 6 Mbps, 9 Mbps, 12 Mbps, 18 Mbps, 24
Mbps, 36 Mbps, 48 Mbps and 54 Mbps.
Preamble Type Select a preamble type. Choices are Long Only and Long and Short.The default
setting is Long and Short.
Refer to Section 2.4 on page 29 for more information.
Power Saving
Mode
Select Maximum or Normal to save power (especially for notebook computers).
This forces the ZyXEL G-270S to go to sleep mode when it is not transmitting data.
When you select Off, the ZyXEL G-270S will never go to sleep mode.
SuperG Select the check box to have the ZyXEL G-270S transmit at up to 108 Mbps when
connected to an AP or wireless router with the Super G feature enabled.