Filter
Top Products
Step 3
Install the Hardware
1. Locate an available USB port on the computer.
2. Insert the N220 into an available
USB port on the computer
The N220's Dual-function LED
and WPS activation button turns
on if it is properly inserted.
Never bend, twist or force the N220 into the port. If there is not
enough space to attach the N220, use the included USB cable.
when inserting indicate the LED/button goes up (in a system where
the USB port is horizontal) or toward the user (in a system where the
USB port is vertical)
Note:
Step 4
Connect with WPS
To connect wirelessly to an Access Point (AP) with the N220, use the WPS button.
1. Place a WPS-enabled AP within range of the N220.
2. Press the WPS activation button on both devices for
between one and three seconds. It doesn't matter
which button is pressed rst. You must press the
second button within two minutes of pressing the rst
one. The LED ashes steadily once they are connected.
See the User's Guide for information about how to manually connect to a wireless
device using the ZyXEL utility.