How to change time on ll bean touch clock

Asked by Ron Follett on 01/12/2015 1  Answer

ManualsOnline posted an answer 9 years, 2 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
0

If you are having difficulty with the touch screen responding to your touch you might try using the eraser end of a pencil as a stylus.

 

TOUCH SCREEN

The product is with touch screen functionality for easily enlarging your desired display area. There are 3 screen areas: main area, temperature area and alarm area. Each enlarged screen displays in main area for only 8 seconds, and then returns to the default display.

 

To view time and date:

Tap on the main area to toggle between time and date.

 

To enlarge an area:

Tap on your desired area (temperature area or alarm area) that will be enlarged to display in the main area.

 

BACKLIGHT

Gently tap/touch the display screen at any time to illuminate the LCD display screen for 8 seconds.

 

BATTERIES INSTALLATION

NOTE Do not use rechargeable batteries. It is recommended that you use alkaline batteries or consumer grade lithium batteries with this product for longer usage.

To insert / replace the batteries:

1. Insert 2 (AAA) alkaline batteries provided before first use, matching the polarities (+/-).

2. Align the cover flat against the battery compartment, and then slide it upwards until it clicks into place to lock the cover.

NOTE You need to reset after battery replacement.

 

TOUCH SCREEN

The product is with touch screen functionality for easily enlarging your desired display area. There are 3 screen areas: main area, temperature area and alarm area. Each enlarged screen displays in main area for only 8 seconds, and then returns to the default display.

 

To view time and date:

Tap on the main area to toggle between time and date.

 

To enlarge an area:

Tap on your desired area (temperature area or alarm area) that will be enlarged to display in the main area.

 

BACKLIGHT

Gently tap/touch the display screen at any time to illuminate the LCD display screen for 8 seconds.

 

SET CLOCK

1. The setting sequence is: 12/24hr, hour, minute, year, month-day format, month and day.

2. Press on the main display area and hold down until 12 HR shows with the 12 flashing then remove finger/thumb. Now in setting mode.

3. Press up and down arrows on the side of the clock to adjust the value of setting.  Once correct, press once to set it and then the next section to set will flash. 

4. Press and hold down up/down arrows for faster setting.

 

NOTE The 12 / 24hr setting for the clock will also affect to the alarm 12 / 24hr setting.

 

ALARM

To set the daily alarm:

1. Press and hold ALARM button to enter alarm setting. The setting is in a sequence: hour and minute.

2. Press up and down arrows to adjust the value of setting. Press and hold for faster setting.

3. Tap on anywhere on the main area to confirm setting.

NOTE To confirm the setting, do not tap on the temperature area or alarm area. Otherwise, the current setting will be automatically saved and exit.

NOTE While setting for the alarm, the alarm area also changes at the same time.

 

To activate/deactivate the alarm:

Toggle ALARM button to activate or deactivate the alarm. Alarm bell icon appears when the alarm is on.

To silence the alarm

• Tap on the touch screen anywhere for an extra 8-minute snooze.

OR

• Press the ALARM button to turn this alarm off.

NOTE If there is no button pressed or touch screen during the first alarm sound the sound rings again after 8 minutes for another 2 minutes, and then end.

 

Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.