A SERVICE OF

logo

15D-Link DAP-2360 User Manual
Section 3 - Conguration
Conguration
To congure the DAP-2360, use a computer that is connected to the DAP-2360 with an Ethernet cable (see the
Network
Layout diagram
).
Launch your web browser.
Type the IP address of the DAP-2360 in the address eld (http://192.168.0.50)
and press Enter. Make sure that the IP addresses of the DAP-2360 and your
computer are in the same subnet.
Note: If you have changed the default IP address assigned to the DAP-2360, make sure to enter the correct IP address.
Enter the user name (admin) and your password. Leave the password eld blank by default and click Login.
Note: If you have changed the password, make
sure to enter the correct password.