32
13
1313
13
Specifications
The E160 specifications are detailed in brief and then subsequently in mor
detail. In the detailed version, we attempt to explain the significance of eac
specification.
The correlation between published specifications and sonic quality can b
unreliable. A list of numbers reveals virtually nothing. All technica
measurements must be subject to qualitative as well as quantitativ
interpretation. Measurements of the E160 reveal excellent results by an
standards. Tested at 115V and 230V after a 10 minute warm up period.
Specifications
In Brief
Rated Power Output: ..................................................................160W
RMS
into 8
(continuous, per channel, both channels driven from 20Hz-20kHz at < 0.020% THD)
.................................................................................................200W
RMS
into 4
(continuous, per channel, both channels driven from 20Hz-20kHz at < 0.035% THD)
Frequency Response:................................................10Hz – 30kHz, +0dB –0.5dB
Total Harmonic Distortion
(THD+N)
Typically:.....................................................................0.005%, @ 1kHz into 8
20Hz to 20kHz: .......................................................................<0.040%, into 8
Voltage Gain:...............................................................................................28.6dB
Dynamic Headroom
(rated with music)
:.............................................................>1.9dB
Voltage Swing: ........................................................................................... 156V
p-
Maximum Current Output:........................................................... 24A per channe
Damping Factor:.................................................................>500, @ 1kHz into 8
Signal to Noise Ratio
Rated Output
(unweighted)
:..............................................................................95dB
Input Sensitivity: ....................................................................................... 1.3V
RMS
Input Impedance:............................................................................................22k
Smoothing Capacitance:.......................................................................... 20,000μF
Driver Stage:...............................................................................................Class
Output Stage:....................................................................................... Class A/AB
Audio Connections
Audio Inputs
Unbalanced:.....................................................................1 pair RCA connectors
Audio Outputs
Speaker:............................................... 1 pair speaker binding posts per channe
Other Connections
1 x IEC AC mains input receptacle
Power Consumption
Idle...................................................................................................................40
Maximum ......................................................................................................450
(at 4Ω rated output)
