167
16 Monitoring System Status and Performing
Diagnostics
This chapter shows you where to find information related to system
events (alarms) and DSL line performance, and how to run a
diagnostic program to troubleshoot problems.
Viewing System Alarms
You can use the Web Configuration to view information about
alarms that occur in the system. Alarms, also called traps, are
caused by a variety of system events, including connection
attempts, resets, and configuration changes. This information may
be helpful in working with your ISP to troubleshoot problems you
encounter with the device. (Despite their name, not all alarms
indicate problems in the functioning of the system.)
Viewing the Alarm Table
To display the Alarm page, log into the Web Configuration, click the
Admin tab, and then click Alarm in the task bar. The Alarm page is
shown in
Figure 73.
Figure 73. Alarm Page
Each row in the table displays the time and date that an alarm
occurred, the type of alarm, and a brief statement indicating its
cause.
You can click on the Refresh Rate drop-down list to select a
recurring time interval after which the page will redisplay with new
data.
You can click
to display a Windows File
Download dialog box that enables opening or saving the contents of
the log to your PC. The file is assigned the default name alarm.vlf,
and can be viewed with any text editor.
To remove all entries from the list, click
. New entries will
begin accumulating and will display when you click
.
