TDM-E400 / TDM-C400 ADSL2+ Modem Router User’s Manual
44
Figure 12. System - Modify Page
2. Modify the fields on this page as required. The following
table describes each field:
Option Description
SNTP
To enable SNTP, click the Enable radio button.
The remaining date and time fields will be
dimmed (unavailable for entry).
Date and Time
To set the date and time manually, ensure that
the SNTP field is set to Disable. Click the date
and time check boxes to select the appropriate
values from the drop-down lists. The time
displays in military format.
Time Zone,
Daylight Savings
Time
If you are setting the date and time manually,
you can select your time zone from the drop-
down list, and then click the appropriate radio
button to indicate whether Daylight Savings Time
is currently in effect.
After you initially set the time, turning DST on or
off will adjust the current displayed time by one
hour in the appropriate direction.
You must remember to change the DST option
each spring and fall — it will not change
automatically.
3. When you are finished modifying the settings, click
, and then click to return to the System
View page.
4. To save your changes to permanent memory, click the
Admin tab, and then click
Commit & Reboot in the task bar.
5. Click
to save your changes to permanent
memory.
