2Wire 1000S Network Router User Manual


 
16
Step
4 Add Computers to the Network
Choose a computer and connection type
After your first computer is connected to the HomePortal residential gateway and your Internet connection
has been established, it is time to connect the other computers to the network.
Use any or all of the following methods to connect additional computers to your network:
* If you use a 2Wire wireless adapter (PC card or USB adapter) in your computer for wireless
networking, the HomePortal Setup Wizard software automatically configures it to communicate with
the HomePortal during setup, but you will need to install the driver. See Appendix A for detailed
installation instructions.
If you are NOT using a 2Wire wireless adapter, you will need to manually configure your adapter of
choice to communicate with the HomePortal BEFORE installing the HomePortal software. See
Appendix B for detailed configuration instructions.
Connection Type Go to...
USB
Requires a Windows 98, 98 SE, ME, Windows 2000, or Windows XP computer
with an available USB port. If you connected your first computer via USB, this
connection type is not available for additional computers.
page 17
Home phoneline networking (HomePNA)
Requires a computer with a HomePNA port or an external HomePNA adapter
such as the 2Wire PC Port.
page 18
Network connection via Ethernet hub or switch
Requires an Ethernet hub or switch and a computer with an Ethernet port.
page 11
Wireless (Model 1000SW only)
Requires a computer with an 802.11b wireless network adapter installed.*
page 19