3Com 1000BASE Switch User Manual


 
T
ECHNICAL
S
PECIFICATIONS
4
FCC Statement
This equipment has been tested with a class A
computing device and has been found to comply with
part 15 of FCC Rules. Operation in a residential area
may cause unacceptable interference to radio and TV
receptions, requiring the operator to take whatever steps
are necessary to correct the interference.
CSA Statement
This Class A digital apparatus meets all requirements of
the Canadian interference-Causing Equipment
Regulations.
Cet appareil numérique de la classe A respecte toutes les
exigences du Règlement sur le matériel brouilleur du
Canada.
VCCI Statement
BSMI Statement
Information To The User
If this equipment does cause interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
Reorient the receiving antenna.
Relocate the equipment with respect to the receiver.
Move the equipment away from the receiver.
Plug the equipment into a different outlet so that
equipment and receiver are on different branch circuits.
If necessary, the user should consult the dealer or an
experienced radio/television technician for additional
suggestions. The user may find the following booklet
prepared by the Federal Communications Commission
helpful:
How to Identify and Resolve Radio-TV Interference
Problems
This booklet is available from the U.S. Government
Printing Office, Washington, DC 20402, Stock No.
004-000-00345-4.
In order to meet FCC emissions limits, this equipment
must be used only with cables which comply with IEEE
802.3.
Europe
This product complies with the European Low Voltage
Directive 73/23/EEC and EMC Directive 89/336/EEC as
amended by the European Directive 93/68/EEC.
Operating Temperature
0 to 50°C (32 to 122°F)
Operating Humidity
10 to 95% non-condensing
Power Consumption
15W maximum
Safety Standards
UL 1950
EN 60950
CSA 22.2#950
IEC 60950
Electromagnetic
Compatibility
CISPR 22 Class A*
EN55022 Class A*
AS/NZS 3548 Class A*
FCC Part 15 Subpart B Class A
ICES-003 Class A
VCCI Class A*
CNS 13438 Class A
Korean EMC Approval Class A
EN55024
*Category 5 screened or unscreened cables must be used to
ensure compliance with the Class A requirements of these
standards.
E
LECTROMAGNETIC
C
OMPATIBILITY
S
TATEMENTS