Filter
Top Products
3Com Router 3000 Ethernet Family
Installation Guide
3. Starting and Maintaining the Route
r
3-6
z Select <1> to change the parameters for downloading. The following information is
displayed:
Change Boot Parameter:
'.' = clear field; '-' = go to previous field; ^D = quit
boot device : fei0
processor number : 0
host name : 8040
file name : M8240ram.arj
inet on ethernet (e) : 169.254.10.10
inet on backplane (b):
host inet (h) : 169.254.10.11
gateway inet (g) :
user (u) : 8040
ftp password (pw) (blank = use rsh):
flags (f) : 0x0
target name (tn) :
startup script (s) :
other (o) :
Note:
You can change the parameter settings behind the colons (:).
The 3036 allows you to download programs through both TFTP and FTP.
z After you set the parameters, select <2> to start downloading.
3) To clear application password, select <4> in the Boot Menu. This is used for clearing a
superuser password. The setting takes effect only once and at a reboot superuser
password authentication is enabled.
Caution:
Upgrade router software only when necessary and with help of engineers. When doing that, make sure that the Boot
ROM software version can work with the version of the adopted application program.
4) To enter the Boot ROM submenu, select <7>.