3Com 3C16701A Switch User Manual


 
6
C
REATING
YOUR
N
ETWORK
What Else Do I Need?
Your OfficeConnect hub comes with:
One power adapter for use with the OfficeConnect hub.
A Product Registration card for you to fill out and return.
Four rubber feet.
A stacking clip.
Two unit labels and eight cable ties.
An OfficeConnect Network Assistant CD-ROM.
To connect workstations and additional OfficeConnect hubs
to your hub, you need extra equipment. The extra
equipment listed in the next section is
not
provided with
the hub.
Workstation Connections
To connect workstations and other equipment to your hub,
you need:
1
10BASE-T connections for all
your equipment. 3Com produce
a range of easy to install
network adapter cards, which
provide your workstations with
10BASE-T connections.
2
An operating system (for example, Netware or
Windows 95/98) with network support configured,
running on your workstations.
3
One straight-through TP cable for every workstation, as
shown in Figure 2.
In order to comply with the 10BASE-T standard, ports
designed for workstation connections have been
marked with the graphical symbol ‘x’. This denotes a
crossover in the port’s internal wiring, for example 1x,
2x, 3x...
Transceiver Connections
If you want to connect a transceiver to your hub (Hub 4C
only), you need:
An AUI cable. The maximum length you can use is 50m
(164ft).
A 10Mbps Ethernet transceiver for the chosen media
type. 3Com produce a range of easy to use transceivers.
3
2
1
3C16700.book Page 6 Wednesday, July 7, 1999 5:46 PM