Filter
Top Products
6
R
ELEASE
N
OTE
FOR
THE
3C975 ATML
INK
155 PCI N
ETWORK
I
NTERFACE
C
ARD
3 Set the frame type (user guide step 4, page 4-14).
4 Set the remaining LEC configuration parameters.
Whenever the link type is changed, the IP information and
the frame type information must be reentered.
Token Ring Keywords for NetWare
In Table 4-2 on page 4-24 of the user guide, the token ring
parameters for the keyword
Frame should be spelled as
token-ring_SNAP
and
token-ring.
NetWare ATMLink Utility
Version 1.5 of the ATMLink Utility can reset individual
ELANs as well as the entire ATMLink 155 PCI NIC.
NetWare 3.12
When more than one ATMLink NIC is installed, or when more
than one frame type is used with a single ATMLink NIC, the
following prompt appears when the drivers are loading:
Do you want to add another frame type for a
previously loaded board?
Perform one of the following steps:
■
Type
n
if:
■
The frame type is specified on the indicated load line
with the Frame keyword.
■
The frame type is not specified on the indicated load
line and you are using the default Ethernet_802.2
frame type.
■
Type
y
and add the appropriate frame type.
3Com recommends that you include the Frame
keyword on every load line, and always answer
n
to the
prompt. See Table 4-2 on page 4-24 of the user guide
for further information on NetWare keywords.