Filter
Top Products
21
3 Position the access point at an angle to the mounting plate bayonet connection and
turn the unit clockwise until it snaps into place, as shown below.
FLAT SURFACE INSTALLATION
The access point can also be placed on a flat surface such as a table, desktop or filing
cabinet. Do not install the access point on any type of metal surface. If you choose a
flat surface mount, select a location that is clear of obstructions and provides good
reception.
Hold the access point at an angle. Turn
clockwise to engage and secure it on
the mounting plate.
Leave at least 13 cm (5 in.) length.
Ethernet cable may be routed through
center opening or through the side.
Center
opening
Side opening
Hook for securing
the cable
Connect
Ethernet cable.
Rotate for
best reception.
Note: Regulatory restrictions dictate that when this device is operational, the minimal
body-to-antenna distance is 1 Meter (3 Feet).