Filter
Top Products
2 Installing the NIC Software
22
4 Edit the autoexec.ncf file and modify NIC load parameters. The NIC
parameters that can be defined in the load statements are
described in "NIC Load Parameters" on page 23.
Example: A valid autoexec.ncf file is shown below. One set of load and
bind commands (in bold) is added for each type of frame the NIC is
configured to support.
NOTE: Depending on your system configuration, the number of clients
being supported, and other requirements, more than 1024 packet receive
buffers may be needed for each NIC.
For more information, see “Editing the STARTUP.NCF File” in the 3Com
Gigabit EtherLink Server NIC User’s Guide for Novell NetWare.
set Time Zone = PST8PDT
set Daylight Savings Time Offset = 1:00:00
set Start Of Daylight Savings Time = (APRIL
SUNDAY FIRST 2:00:00 AM)
set End Of Daylight Savings Time = (OCTOBER
SUNDAY LAST 2:00:00 AM)
set Default Time Server Type = SINGLE
# Note: The Time zone information mentioned
above
# should always precede the SERVER name.
set Bindery Context = O=3Com
file server name MARS
ipx internal net 34881EEE
load 3c986 slot=4 frame=Ethernet_802.2
name=3c986_1_e82_2
bind ipx 3c986_1_e82_2 net=aaaa
mount all
set immediate purge of deleted files = on
set upgrade low priority threads = on
set display spurious interrupt alerts = on
set display lost interrupt alerts = on