3Com External ISDN Modem Network Router User Manual


  Open as PDF
of 6
 
Configuring the 3C882 ISDN Modem Using a PC
3
5
If you are connecting analog equipment, connect one
end of the RJ-11 connector into the RJ-11 modular jack
labeled with a telephone icon on the back of the ISDN
modem.
6
Connect the other RJ-11 end into the appropriate RJ-11
port on the analog device.
7
Connect the 3C882 ISDN modem power cable to the
9 VDC power connector on the back panel of the ISDN
modem.
8
Plug the transformer end of the power cable into a
surge-protected standard 110 VAC wall outlet.
Configuring the 3C882 ISDN Modem Using a PC
To install the 3C882 ISDN modem software:
1
Insert the
3ComImpact IQ Windows & DOS Installation
Diagnostic Utilities
diskette into an available floppy drive.
2
If you are using Windows 95, select
Run
from the
Start
menu. If you are using Windows 3.x, select
Run
from the
File
menu. In the Run dialog box, type: a:setup.
3
Click
OK
.
4
Double-click the
3ComImpact IQ
globe icon to run the
SPID Wizard configuration program.
A message box indicates that the SPID Wizard has started.
The dialog box for the first telephone number appears.
5
Enter the telephone number for your ISDN line.
6
Click
Next
.
The SPID for telephone number one is automatically
configured.
 previous next