3Com Switches Switch User Manual


 
8
The 3Com SuperStack II Baseline
10/100 switches provide the highest
performance product in the SuperStack II
Baseline family. Delivering the power of
switched Fast Ethernet while automati-
cally sensing the speed of the connected
devices, the SuperStack II Baseline
switches are ideal for any environment
where raw power and performance are
needed, but management is not
required. The Baseline 10/100 switches
can be used as an aggregation device
connecting to other switches or hubs,
or to provide cost-effective, high-
performance desktop connections.
The Baseline 10/100 switches
provide 12 or 24 10/100BASE-TX
(Fast Ethernet) switched ports that
automatically detect the speed of
connected devices, optimizing network
performance to 100BASE-TX, where
applicable. The SuperStack II Baseline
switches are unmanaged and work
straight out of the box.
Key features include:
12 or 24 RJ-45 10BASE-T/
100BASE-TX autosensing ports
provide the ultimate in high-speed
switching connectivity.
Autonegotiating full-/half-duplex
operation on each port doubles the
speed of each network connection
to 200 Mbps.
MAC addresses support up to
4,000 network devices on your
local area network.
IEEE 802.3x Flow Control ensures
network traffic is not lost during
peaks in traffic rates on high-
throughput, full-duplex links.
19” size for easy installation in a
wiring closet. A rackmounting kit
is supplied. The product can also
be used free-standing.
Diagnostic LEDs indicate network
traffic and port status of each port,
making it easy to spot-check faults
and check individual port status.
3Com lifetime limited warranty
Connection for the SuperStack II
Advanced Redundant Power
System provides ultimate protec-
tion against network downtime.
The SuperStack II Advanced
Redundant Power System and
Uninterruptible Power System are
also available from 3Com.
SuperStack II Baseline 10/100 Switches
SuperStack II Baseline 10/100 Switches
Front view of 24 port
Back view
24 ports (RJ-45) LEDs for link status
and network traffic
Advanced RPS
connector
(Type 2)
MDI/MDIX
switch
Front view of 12 port
LEDs for link status
and network traffic
MDI/MDIX
switch
12 ports (RJ-45)