Filter
Top Products
16
BEFORE YOU BEGIN
Record the access point MAC address in a safe place before the access point is
installed in a hard-to-reach location. The MAC address is printed on the back of the
access point housing.
The following illustration shows the front and rear views of the access point, including
the LEDs and connecting ports.
CONNECTING THE STANDARD ANTENNAS
The Access Point 8250 and Access Point 8750 are supplied with standard detachable
antennas. These should be attached before the access point is installed. If using an
alternate antenna, see “Selecting and Connecting a Different Antenna Model” on
page 22.
Regulatory restrictions dictate that when this device is operational, the minimal
body-to-antenna distance is 1 Meter (3 Feet).
LEDs
Reset
button
Console port
Ethernet port
Access Point 8500 Access Point 8250/8750
Caution: Do not connect a telephone cable into the Console port; doing so can cause
serious damage to the access point.