Filter
Top Products
3M™ Overhead Projector 1700 Series Illustrated Parts Breakdown
© 3M 2005. All Rights Reserved. 1
MFG Code
Lette
r
Di
g
it
E 1997 1 Jan-Ma
r
F 1998 2
Apr
-Jun
H 1999 3 Jul-Se
p
J 2000 4 Oct-Dec
K 2001 1 Jan-Ma
r
A
2004 2
Apr
-Jun
C 2005 3 Jul-Se
p
INTRODUCTION
This Illustrated Parts Breakdown (IPB) Manual contains the information necessary to locate and identify
assemblies, sub-assemblies, and specific parts of the 1700 Overhead Projector.
Part Numbers
All components available on a replacement basis are listed with their 3M identification number. The parts
identification list opposite each illustration provides the description adequate to identify components. If the
component is available only as part of the next higher assembly, the description column provides the next
higher assembly description or identification number.
Locating and Identifying a Part
If physical appearance and general location of an item are known:
1. Use the IPB Section Titles to help determine which assembly or sub-assembly includes the item.
2. Refer to the view for the assembly or sub-assembly and locate the item on the exploded view. Match the
part callout number to the corresponding number in the parts list.
3. Parts shown inside a dashed box can only be ordered as an assembly. Any part or mounting hardware
shown outside the box is not included with the assembly.
Machine Identification Plate
The serial number plate for the 1700 is located on the
inside wall of the projector. The Machine Identification
Plate is divided into the following components:
1. Product Name: The specific version number of the
projector.
2. Model Number/Alpha Code: The series number of the
projector followed by a three or four character alpha
code identifier. The Alpha Code indicates the design
level, specific product characteristics, power cord or
distribution specific to a country.
3. Lamp: The electrical rating of the lamp.
4. MFG Code: The MFG Code indicates the year and
quarter the projector was built. (See the example to
the right):
5. S/N: The serial number assigned to this projector.
Ordering Parts
When ordering parts, include the following
information:
1. Machine model number and serial number.
2. Parts identification number.
3. Part description.
4. Quantity required.
For U.S. retail customers: Call 1-800-650-8429, or fax 1-800-650-9268. Dealers: Refer to Dealers Guide.
3M Subsidiaries: Contact Export Operations.
1
5 4 3
2