3M 1800 Series Projector User Manual


 
3M Overhead Projector 1800 Illustrated Parts Breakdown
© 3M 2007 35
Section 21. Plastic Parts Kit
3M Part Number Description of Parts Included in Kit Qty.
Latch, Top Cover 2
Spring, Compression, #LC-029C-5MW, 18.5 lb/in 1
Spring, #LC-014B-4NW 2
Strain Relief 1
Fan 1
Knob, Gear/Focus, Red 2
Knob, Gear/Focus, Blue 2
Latch, Folding Post, Red 2
Latch, Folding Post, Blue 2
Cradle, Post 3
Pivot, Top Cover 2
Button, On/Off, Red 1
Button, On/Off, Blue 1
Cam, Switch 2
Pin, Cam Pivot 2
Knob, Color Tune (Dual) 1
Knob, Lamp Change, Red 3
Knob, Lamp Change, Blue 3
Cap, Post, Black 3
Plastic Parts Kit
78-8120-8521-1
Bar, Stabilizer 1
Section 22. Small Electrical Parts Kit
3M Part Number Description of Parts Included in Kit Qty.
Clock, LCD 1
Tape, Foam 1
Resistor, 1.2 Ohm, 0.25 tab 3
Clip, Tinnerman #C54923-017-4 1
Switch, Lamp Changer, Left Hand 3
Switch, Lamp Changer, Right Hand 3
Thermostat 3
Switch, Hi/Lo 3
Fuse, 5 Amp, 5 x 20mm, Slow Acting 1
Switch, Interlock 3
Diode 5
Socket, Lamp, Single 1
Socket, lamp, ENX/FXL 1
Socket, Lamp, Dual 1
Socket, Lamp, Single FNT 1
Small Electrical Parts
Kit
78-8120-8522-9
Dual Lamp Socket Assembly 1