Filter
Top Products
3M™ Hot Melt Connectors are among the most popular with
contractors because of their reliability and ease of use. They
come pre-loaded with an adhesive that is not limited in shelf
life, and the termination procedure provides the ability to reheat
and reposition the fibre in the termination process. This easy-
to-install field mount connector provides reliable performance
in indoor and outdoor applications and has no internal splice.
All 3M™ Hot Melt connectors can be terminated using the
same 3M™ Hot Melt Termination Kit 6365/6361. 3M™ LC
Connectors require the 3M™ LC Expansion Kit 6650-LC
which includes a weighted polishing jig to provide a PC centred
apex end face.
APPLICATIONS:
The applications for the hot melt connector are based on industry
standards for performance over environmental extremes.
3M™ HOT MELT CONNECTORS
• Singlemode and multimode local area networks and campus
wiring
• Singlemode telephony central office and CATV headend
• Environmental performance requirements exceeding
ISO 11801, EN 50173 and EIA/TIA 568-B.3
• Singlemode reflection requirements of –55dB
• Available in LC, ST, SC, FC singlemode and multimode
connectors
• Provides reliable performance in a wide range of indoor and
outdoor applications
3M™ Hot Melt LC-Duplex Connector
3M™ Hot Melt ST-Connector
3M™ Hot Melt SC-Connetor