Filter
Top Products
Page 6
LED Indicators
ÿ The following table describes the LED status and description. The LEDs provide a
real-time indication of system conditions.
Rear Panel
The 3-pronged power plug is located at the Rear Panel of the Mini-switch as shown
in Figure 2-2. The Switch will work with 100-240V AC, 50-60Hz.
Figure 2-2 The Rear Panel of the VOL-1081 Fiber Switch
LED Status Color Description
Power
On Green Power On
On Green The port is operating at the speed of 100Mbps.
100 Mb
Off In 10Mbps mode or no device attached
On Green The port is successfully connecting with the device.
Blinks The port is receiving or transmitting data.
Lnk /
Act
Off No device attached.
On Yellow The port is operating in Full-duplex mode.
Blinks Collision of Packets occurs in the port.
Fdx /
Col
Off Half-duplex mode or no device attached.