3M X40 Projector User Manual


 
16
VIDEO
ASPECT
MUTE
KEYSTONEFREEZE
OFF
ON
MENUPOSITION
ENTER
ESC RESET
VOLUME
MAGNIFY
AUTO BLANK
RGB SEARCH
STANDBY/ON
1
Press the STANDBY/ON button of remote
controrol or the on/off button of control panel
The message "Power off?" will appear on the screen for approximately 5 seconds.
3
TURNING OFF THE POWER
2
Press the STANDBY/ON or on/off button
again(remote control or control panel)
Press the STANDBY/ON or on/off button again while the "Power off?"
message is visible. The projector lamp goes off and starts cooling
down. The power indicator blinks orange while the lamp cools
down. (Pressing the STANDBY/ON or on/off button while the power
indicator is blinking orange has no effect.)
The system goes into the STANDBY mode after
cooling down and the power indicator stops
blinking orange and then lights to solid orange.
Except in
emergencies, follow
the above-
mentioned
procedure for
turning power off.
NOTE
Control panel
lamp
temp
power
on off
video rgb
reset
menu
keystone
Check that the power indicator stops
blinking and lights to solid orange.
When the projector has
Switch the power switch to [O] (OFF).
completed powering down,
the power indicator will go off.
power indicator
power switch