Filter
Top Products
9
3.5 Oiling the shredding mechanism
If the sheet capacity reduces or after “bag full“ we
recommend that you oil the shredding mechanism.
- Press the oilpump button 3 x.
- After lubrication let the machine run several times
backwards and forwards alternately.
- If tank (8) is empty refill with oil.
Type of oil: cutting head oil
3.6 Replacing the plastic bag (IDEAL 4107)
Replace bag when “bag full“ indicator lights.
- Open the door (9).
- Pull out the plastic bag holding the bottom of the
bag.
- Push down the waste paper.
- Pull out the waste bag with frame (10) until it
stops.
- Remove the round belt (11) from the waste bag
frame.
- Tie the bag (for sealing parts and binding wires
see accessories).
- Place a new bag into the bag frame (10) and turn
the edge over the outside of the frame.
- Fasten the bag with the round belt. The round belt
must fit into the channel of the bag frame.
- Push the bag frame into the machine and adjust
the plastic bag with your foot.
- Close the door (9).