Abit AV8 Computer Hardware User Manual


 
3-4 Chapter 3
AGP and PCI bus frequency would stay unchangeable at 66MHz and 33MHz.
Voltages Control:
This option allows you to switch between the default and user-defined voltages. Leave this setting to
default unless the current voltage setting cannot be detected or is not correct. The option “User Define
enables you to select the following voltages manually.
CPU Core Voltage:
This item selects the CPU core voltage.
AGP VDDQ Voltage:
This item selects the voltage for AGP slot.
DDR SDRAM Voltage:
This item selects the voltage for DRAM slot.
NB Voltage:
This item selects the NB voltage.
SB Voltage:
This item selects the SB voltage.
HyperTransport Voltage:
This item selects the voltage for LDT Bus.
<F8> function key:
After a new configuration on items “External Clock” and “Voltage”, pressing <F8> button now in this
menu will make it become effective immediately.
ATTENTION: An external clock too much over its specification may cause the system unstable or even
fail, please proceed with highly attention.
Power Cycle Statistics:
Click <Enter> key to enter its submenu:
These items display the power cycle statistics for each element.
AV8