Filter
Top Products
BIOS Setup
AW9D-MAX, AW9D 3-15
CPU Feature
Click <Enter> key to enter its submenu:
Phoenix – AwardBIOS CMOS Setup Utility
CPU Feature
Thermal Management Thermal Monitor 1 Item Help
X - TM2 Bus Ratio 12 X
x - TM2 Bus VID 0.8375V
Limit CPUID MaxVal Disabled
C1E Function Enabled
Execute Disable Bit Enabled
EIST Function Enabled
↓↑
→←
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Thermal Management
This item selects the type of thermal monitoring.
- TM2 Bus Ratio
This item represents the frequency (bus ratio) of the throttled performance state that will be
initiated when the on-die sensor goes from not hot to hot.
- TM2 Bus VID
This item represents the voltage of the throttled performance state that will be initiated when
the on-die sensor goes from not hot to hot.
Limit CPUID MaxVal
When set to [Enabled], this item limits the CPUID maximum value to 3, which is usually
required for older OS like Windows NT4.0.
Leave this item at its default [Disabled] settings for OS like Windows XP.
C1E Function
This item appears only for certain processors with the C1E (Enhanced Halt State) Function.
When set to [Enabled], the processor will further reduce the total power consumption.