Filter
Top Products
BIOS Setup
IP-95 2-1
2. BIOS Setup
This motherboard provides a programmable EEPROM so that you can update the BIOS utility.
The BIOS (Basic Input/Output System) is a program that deals with the basic level of
communication between processor and peripherals. Use the BIOS Setup program only when
installing motherboard, reconfiguring system, or prompted to “Run Setup”. This chapter
explains the Setup Utility of BIOS utility.
After powering up the system, the BIOS message appears on the screen, the memory count
begins, and then the following message appears on the screen:
PRESS DEL TO ENTER SETUP
If this message disappears before you respond, restart the system by pressing <Ctrl> + <Alt>
+ <Del> keys, or by pressing the Reset button on computer chassis. Only when these two
methods fair should you restart the system by powering it off and then back on.
After pressing <Del> key, the main menu screen appears.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
► Standard CMOS Setup ► CPU PnP Setup
► Advanced Setup ► Hardware Monitor
► Features Setup Load Optimal Defaults
► Power Management Setup Save Changes and Exit
► PCI/PnP and Play Setup Discard Changes and Exit
► BIOS Security Features
:Move Enter:Select +/-/:Value F10:Save EXC:Exit
F1:General Help F9:Optimized Settings
Standard CMOS setup for changing time, date, hard disk type, etc.
V02.59 (C)Copyright 1985-2005, American Megatrends, Inc.
※ In order to increase system stability and performance, our engineering staff is
constantly improving the BIOS menu. The BIOS setup screens and descriptions
illustrated in this manual are for your reference only, and may not completely
match with what you see on your screen.