Abit IS7-M Computer Hardware User Manual


 
2-12 Chapter 2
(6). Front Panel Switches & Indicators Headers
This header is used for connecting switches and LED indicators on the chassis front panel.
Watch the power LED pin position and orientation. The mark “+” align to the pin in the figure below
stands for positive polarity for the LED connection. Please pay attention to connect these headers. A
wrong orientation will only cause the LED not lighting, but a wrong connection of the switches could
cause system malfunction.
IS7-G/IS7/IS7-E: IS7-M: IS7-E2/IS7-E2G/IS7-E2V:
IS7-V2:
IS7 Series