Filter
Top Products
2.Run INSTALL.EXE from root directory of
driver diskette.
3.Select LANTASTIC 6.0 in Network Operating
System screen.
4.If current settings are acceptable, select Start
Installation” and go to step 6. Otherwise, select
Modify Parameters” to make settings changed.
5.Move cursor to focus on each field you want to
make a change and press <Enter>” to select a fit
value. When the configuration is set completely,
press <Enter>” on the OK field to exit the
screen and go back the step 4.
6.Installation program starts to copy the related
files from diskette to the destination directory
and modifies CONFIG.SYS, PROTOCOL.INI,
and STARTNET.BAT under usersymbol 146 \f
"Parisian BT" \s 10’}s agreement.
7. Please reboot the computer to have the driver
take effect.
IBM OS/2 Warp
NDIS2 Driver for OS2 Warp
Before the driver installation, please ensure that the
PCMCIA Service was installed and worked
-17-