Abocom PLC342 Switch User Manual


 
Page 2/2
Product outlook
Specification
Main Chipset DS2 DSS9010+ DSS7800 + Realtek RTL8306
Standard support UPA DHS (200 Mbps) PLC, IEEE 802.3 & 802.3u.
Interface One 75 ohms F-type coaxial port, four 10/100Mbps Ethernet ports.
One security button, one factory-reset button, one stand-by button.
Security 3DES 168 bits encryption
Power AC 100~240V/ 50~60Hz/ 0.15A; 8W/230V max.; 7W/110V max.
Dimension (W x D x L) 121.4 mm(130.8mm with coaxial connector) x 100 mm x 28.5 mm.
LED
PWR/AP: Red & Green
Green On: EP type,
Orange On: Fixed AP type,
Orange-Green Blinking: Security setup mode.
Off: Power Off.
PLC/SPD: Red & Green
Green On: Coaxial Link speed over 12Mbps,
Orange On: Coaxial Link speed between 12Mbps and 6Mbps,
Red On: Coaxial Link speed under 6Mbps,
Blinking: Coaxial in activity.
Off: Coaxial in no-link.
LAN (1-4): Yellow-Green
On: Ethernet in link
Blink: Ethernet in activity.
Off: Ethernet in no-Link
Connection Range At least 300 Meters (For in-house usage only)
Operating Operating Temperature: 0~40ºC (32~104ºF)
Relative Humidity: 10%~90% non-condensing
Storage Temperature: -10~70ºC (14~158ºF)
Relevant Humidity: 5%~95% non-condensing
CERTIFICATIONS FCC Part 15B & 15C, Class B; CE Class B (EN55022/EN55024)
UL 60950-1, CB.