Abocom SW1600B Switch User Manual


 
- 1 -
INTRODUCTION
The 16-Port Fast Ethernet 10/100Mbps N-Way Switch provides you a flexible, reliable, and
affordable solution of the Ethernet network. It comes with sixteen 10BASE-T /100BASE-TX
ports. The 16-Port Fast Ethernet 10/100Mbps N-Way Switch is able to operate in both half
and full-duplex modes. Each port delivers up to 200Mbps throughput in full duplex mode.
The 16-Port Fast Ethernet 10/100Mbps N-Way Switch also processes a N-Way auto-
negotiation function, which automatically adjusts the device for optimum operation; “Store-
and-Forward” architecture filters to eliminate error packets and improve efficiency. Plus, the
auto-MDI/MDIX technology provides the convenience of using a straight through or a
crossover Ethernet cable and you will be connected with any other devices. Moreover, the
built-in Universal Power Supply allows you to install the switch easily without the external
power adapter.
Key Features
Complies with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX standards
“Store and Forward” architecture filters
IEEE 802.3x or Back Pressure (HDX) Flow Control
16 x RJ45 STP/UTP Ethernet ports on front panel
4K MAC Address table supported
10/100Mbps auto-detection on Full or Half Duplex
Each Ethernet port supports Auto-MDI/MDIX (auto-crossover) technology
Provides non-blocking and Head-of-line blocking forwarding prevention
256KB on-chip buffer
Built in Universal Power Supply: 90~264V
Emission certification: FCC Class B, CE mark