Abocom SW2400M Switch User Manual


 
- 1 -
INTRODUCTION
The 24-Port Fast Ethernet 10/100Mbps N-Way Switch provides you a flexible, reliable,
and affordable solution for an Ethernet network. It comes with twenty-four independent
10BASE-T/100BASE-TX ports. Each port delivers up to 200Mbps throughput, and is
able to operate in either half or full-duplex modes.
The 24-Port Fast Ethernet 10/100Mbps N-Way Switch also possesses a N-Way auto-
negotiation function, which automatically adjusts the device for optimum operation.
“Store-and-Forward” architecture filters eliminate error packets and improve efficiency.
Plus, based on Auto-MDI/MDIX technology, you are able to use either a straight through
or a crossover Ethernet cable to connect with other devices. Moreover, the built-in
Universal Power Supply allows you to install the switch easily without any external
power adapter.
Key Features
Complies with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX standards
Supports twenty four 10M/100M auto-detect Half/Full duplex switch ports
Supports 802.3x Flow Control pause packet for Full Duplex in case buffer is full
Supports Back Pressure function for Half Duplex operation in case buffer is full
All ports support Auto-negotiation
Supports source/ destination MAC address lookup and aging with 8K MAC address
(4K entries each entry table)
Store -and-Forward switching operation
No-head-of-line blocking system support
Broadcast storm prevention
Built in Universal Power Supply: 90~264V
Emission certification: FCC Class A, CE mark