Filter
Top Products
12. Click Yes to continue.
13. Click Finish to complete the software
installation.
14. To verify if your network adapter exists in
your computer and well enabled, you can
perform the following steps.
15. Go to Start Æ Settings Æ Control Panel
Æ Systems Æ Hardware Æ Device
Manager.
16. Click Intelligent ISDN Drivers, Network
adapters and Universal Serial Bus
controllers to expand. If Intelligent CAPI
2.0 driver, Intelligent USB adapter,
Intelligent ISDN WAN miniport,
Intelligent USB 10/100 Network Adapter
and Generic USB Hub are found, that
means your network adapter exists and
enabled. If not, consult your distributor for
technical support.
- 11 -