Filter
Top Products
- 6 -
Setup Diagnostics
You can perform the following steps to check if your
USB V.90 Tiny Modem is well installed.
1. Go to
Start→Settings→Control Panel→Modems.
2. When the Modems Properties dialog box
appears, select the Diagnostics tab.
3. Select USB V.90 TINY MODEM and click OK.
4. If USB V.90 TINY MODEM is not found, stop
the diagnostics procedures and skip to the
following section titled Uninstallation.
5. The USB modem is well installed if the
information is found on the following screen.
Click OK to exit.