Filter
Top Products
-
15 -
in the wireless LAN must be
configured to share the same radio
channel in order to function properly.
Power Save
CAM
(Constantly
Awake Mode)
Keeps the PC card powered up
continuously so there is little lag in
message response time.
Consumes the most power but offers
the highest throughput. Is
recommended for desktop computers
and devices that use AC power.
Max (Power
Save Mode)
Causes the access point to buffer
incoming messages for the client
adapter, which wakes up periodically
and polls the access point to see if
any buffered messages are waiting for
it. The PC card can request each
message and then go back to sleep.
Conserves the most power but offers
the lowest throughput. Is
recommended for devices which
power consumption is the ultimate
concern (such as small
battery-powered devices).
Fast (Power
Save Mode)
Switched between PSP mode and
CAM mode, depending on network
traffic. This mode switched to CAM
when retrieving a large number of
packets and switches back to PSP
after the packets have been retrieved.
It is recommended when power
consumption is a concern but you
need greater throughput than that
allowed by Max PSP.
Encryption
Algorithm
WEP (Wired Equivalent Privacy)
AES (Advanced
Encryption
Standard
)