Abocom M73-APO07-300 Network Router User Manual


  Open as PDF
of 2
 
- 2-
service that runs PPPoE. If your xDSL
service uses PPPoE, after installing the
Wireless router, do not run PPPoE
software on your computers.
Static configuration
Select this item when the ISP assigns
static IP address for your account.
4. When finished, click Wireless in the left pane for Wireless LAN settings.
Wireless Configuration
SSID
You have to assign an SSID for identification.
Channel No.
You have to select a Channel No as the Channel ID for
identification too.
Basic Rate
Set to 1,2 Mbps by default.
STEP 3: CHECKING THE INTERNET CONNECTION
• To see
if the IP Sharing device is visible on the local network, go to
Start
Æ
Run “PING
192.168.1.254”
• To check if this IP Sharing device is connected to the Internet, run “
PING 168.95.192.1 – w
3000
”.
• Run a web browser to surf the Internet.
 previous