Filter
Top Products
- 14 -
Open
Authentication
If the Access Point is using
"Open Authentication”, then the
wireless adapter will need to be
set to the same authentication
mode.
Shared
Authentication
Shared Authentication is when
both the sender and the recipient
share a secret key.
Auto Select Auto for the network
adapter to select the
Authentication mode
automatically depending on the
Access Point Authentication
mode.
Key Length 64 Bit or 128 Bit.
Key Format Select HEX if you are using
hexadecimal numbers (0-9, or
A-F).
Select ASCII if you are using
ASCII characters
(case-sensitive).
Ten hexadecimal digits or five
ASCII characters are needed
if 64-bit WEP is used; 26
hexadecimal digits or 13 ASCII
characters are needed if 128-bit
WEP is used.
Default Key
{ 1
{ 2
{ 3
{ 4
This setting is the configuration
key used in accessing the
wireless network via WEP
encryption.
Select one default key then fill in
the appropriate value/phrase in
Network Key field. (Please refer
to the Key Format description
for the limitations on the
Network Ke
y
.
)
Note: You must