Accell MPC-816 Series Computer Hardware User Manual


 
-11-
MPC-816XC Compact Controller 8 Outputs, 16 Inputs
[Characteristics]
This is a single MPC-816 stored in a case. Please use it when you use one CPU board installed directly in an apparatus.
Refer to MPC-816K for the specification details.
[Accessories] (1) Housing (PS-D4C50) JAE *1
(2) Power connector (H4P-SHF-AA) JST *1
(3) Contacts (BHF-001T-0.8SS) JST *4
MPC-SET (EX) Compact Controller 16 Outputs, 32 Inputs
[Characteristics]
This is a combination of MPC-816 and MIF-816 stored in a case. It can be used also as a controller with 16-point
output and 32-point input. Also, because simple pulses can be generated (max 60 Kpps) from J5 of MIF, it can be used
also as a positioning device.
Refer to MPC-816K and MIF-816K for the specification details.
[Accessories] (1) Housing (PS-D4C50) JAE *2
(2) Power connector (H4P-SHF-AA) JST *1
(3) Contacts (BHF-001T-0.8SS) JST *4
(4) Connector (HIF-3BA-16D-2.54R) Hirose *1
MIO-816K Expanded I/O Board 8 Outputs, 16 Inputs
[Characteristics]
This is an expanded I/O board for MPC. Expansion is possible up to 11 boards. Because all the I/Os are isolated by
photocouplers, noise resistivity is high, and each I/O can be used by power sources different from the others. Also, by
installing a J2 connector by the user, a small-scale system can be constructed in combination with MPC-816 without
using MIF-816.
[Specification]
Power source: DC 12V~24V (for I/O control).
Control I/O: 8-point open collector output, 16-point photocoupler input.
Consumed current: 50 mA.
[Accessories] (1) Housing (PS-D4C50) JAE *1
(2) Power connector (H4P-SHF-AA) JST *1
(3) Contacts (BHF-001T-0.8SS) JST *4
MIO-248K Expanded I/O Board 24 Outputs, 8 Inputs
[Characteristics]
This is an expanded I/O board for MPC. Expansion is possible up to 11 boards. Because all the I/Os are isolated by
photocouplers, noise resistivity is high, and each I/O can be used by power sources different from the others. Also,
because it is designed to be compatible with DC 5V, it can also be used as a TTL interface. When used with 5V, a
resistor array is added to the SIP socket.
[Specification]
Power source: DC 5V~24V (for I/O control).
Control I/O: 24-point TLP627 photocoupler open collector output,8-point photocoupler input.
Consumed current: 110 mA.
[Accessories] (1) Housing (PS-D4C50) JAE *1
(2) Power connector (H4P-SHF-AA) JST *1
(3) Contacts (BHF-001T-0.8SS) JST *4
MPC-SET(EX)
FLASH
Slide-in Bra in ACCEL
MIO-248K CEP -058B
ACCEL CORP.
(2)
(1)
(3)
(2)
(1)
(3)
(4)
(2)
(1)
(3)
(2)
(1)
(3)