Filter
Top Products
Necessary Tools
1.
2. #2 Phillips Screwdriver
Disassembly ofthe shredder isdescribed inthe following steps.
Top Housing Removal
WARNING!
Disconnect the unit from the receptacle before performing
any disassembly procedures.
1.Unplug the power cord from the outlet power supply.
2.Open cabinet door and remove the 3 phillip head screws that
secure shredder top cover to cabinet base.
3.Remove the 4 phillip head screws from the back side of the
shredder which secures top cover to cabinet base.
4. Lift top cover. Remove and label the 3 cables from control
panel.
Engine Assy. (Cutting Head Assy.) Removal
1. Remove the six phillip head screws that secure the main pcb
box to the bottom base.
2. Remove pcb box front cover. Unplug and label all wires from
main pcb box.
3. Open cabinet door and remove the four (14 mm) hex nuts and
4. Carefully lift out engine ( cutting head ) assy and place
place on your work area.
Troubleshooting
Adjustable wrench
two wing nuts from the bottom base of engine (cutting head).
8
2
2
2
3
3
3
1