Filter
Top Products
Fast EtherHub-12se User’s Guide
Hardware Reference 4-5
7UDQVPLW5HFHLYH$FWLYLW\
Color: Green
Label:
Traffic
Function: Indicates traffic traversing the port.
Condition Indication
%/,1.,1* ,QGLFDWHVWKHSRUWLVWUDQVPLWWLQJRUUHFHLYLQJSDFNHWV
EOLQNLQJLVSURSRUWLRQDOWRWKHWUDIILFSDVVLQJWKURXJKWKHSRUW
2)) 1RSDFNHWVDUHEHLQJWUDQVPLWWHGIURPWKLVSRUW
RJ-45 Ethernet Ports
This hub includes 11 Fast Ethernet station ports; of which Port 12 can also
serve as a daisy-chain port. Use straight-through twisted-pair cable to connect
the shielded MDI-X station ports to a workstation or server; or to connect the
MDI port to another network interconnection device, such as a hub or switch.
When using Port 12, remember to set the selection switch to MDI-X when
connecting to a workstation, or to MDI when cascading to another hub or
switch. Remember to use 100
Wcategory 5 straight-through twisted-pair cable
(STP or UTP) for all standard connections.
Note: If you must cascade between MDI-X station ports on two hubs, then use
crossover cable.
Fiber Optic Ethernet Port
The 100BASE-FX port provides TX/RX jacks for connecting to any compatible
network device using multimode fiber optic cable with SC or ST type connec-
tors. Mate the TX/RX jacks with the RX/TX jacks on the target device. (Note
that 50/125
mm and 62.5/125 mm cable are the only types supported by this
hub.) This port can be connected to any device that provides media connection
for 100BASE-FX, such as a workstation, high-speed server, or other network
interconnection device.