Filter
Top Products
2
Quick Installation Guide
LED Indicators
The following table describes the operation of the Cheetah PCI
Adapter status LEDs:
DEL sutatS noitpircseD
KNL
spbM01neerGknilT-ESAB01dilaV
ffOnoitcennocT-ESAB01:ffosirewoP
dilavnisi
spbM001neerGknilXT-ESAB001dilaV
ffOXT-ESAB001:ffosirewoP
dilavnisinoitcennoc
TCAneerGytivitcakrowtenyvaeH
gniknilBkrowtenthgilrotnettimretnI
sietargniknilbeht(ytivitca
fotnuomaehtotlanoitroporp
)ciffartkrowten
Installation
Warnings:
· Network cards are sensitive to static electricity. To protect the card, avoid
touching its electrical components and always touch the metal chassis
of your computer before handling the card.
· Backup your driver diskette and use the copy as the working diskette to
protect the original from accidental damage.
1. Switch off the computer, unplug the power cord, and
remove the computer’s cover.
2. Select an unused PCI bus-master slot and remove its
protective bracket.
3. Carefully insert the card and press until all the edge
connectors are firmly seated inside the slot. Then, screw
the card’s bracket securely into the PC’s chassis.