Filter
Top Products
56 Chapter 3
13. Disconnect the microphone cable. Then remove the top cover shielding.
14. Use a flat-headed screw driver to release the CPU then remove the CPU from CPU socket.
15. Put the CPU back to the socket, then lock the CPU to the socket with as flat-headed screw driver.
NOTE: If you use an ordinary flat-headed screw driver to remove the CPU. Please be very careful to prevent
any damage.
16. Pop out the memory then remove it.
17. Unscrew the two screws that secure the modem/bluetooth combo card. Remove the modem/bluetooth
combo card then disconnect the connector.
18. Disconnect the bluetooth antenna and the modem cable.
19. Disconnect the smart card reader FPC.
20. Unscrew the two screws holding the smart card reader then remove it.