Filter
Top Products
Chapter 2 43
BIOS Setup Utility
The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/
Output System).
Your computer is already properly configured and optimized, and you do not need to run this utility. However,
if you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4
Troubleshooting when problem arises.
To activate the BIOS Utility, press
m during POST (when “Press <F2> to enter Setup” message is prompted
on the bottom of screen).
Press m to enter setup. The default parameter of F12 Boot Menu is set to “disabled”. If you want to change
boot device without entering BIOS Setup Utility, please set the parameter to “enabled”.
Press <F12> during POST to enter multi-boot menu. In this menu, user can change boot device without
entering BIOS SETUP Utility.
PhoenixBIOS Setup Utility
CPU Type :
CPU Speed :
System BIOS Version: V0.1105
VGA BIOS Version:
KBC BIOS Version:
ATi 008.050I .038.000
Serial Number
xxxxxxxxxxxxxxxxxxxxxx
Asset Tag Number N/A
Produce Name Aspire 5050/3050
Manufacturer Name: Acer Inc.
UUID:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
F1 Help
↑↓
Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit
←→
Select Menu Enter Select
4
Sub-Menu F10 Save and Exit
IDE1 Model Name :
IDE1 Serial Number :
HTS541010G9AT00
MP20XAX0K6K97S
22 Byte
32 Byte
16 Byte
16 Byte
32 Byte
Main Security Boot Exit
Information
System Utilities
Chapter 2