Filter
Top Products
Chapter 2 39
BIOS Setup Utility
The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/
Output System).
Your computer is already properly configured and optimized, and you do not need to run this utility. However, if
you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4
Troubleshooting when problem arises.
To activate the BIOS Utility, press
m during POST (when “Press <F2> to enter Setup” message is prompted
on the bottom of screen).
Press m to enter setup. The default parameter of F12 Boot Menu is set to “disabled”. If you want to change
boot device without entering BIOS Setup Utility, please set the parameter to “enabled”.
Press <F12> during POST to enter multi-boot menu. In this menu, user can change boot device without
entering BIOS SETUP Utility.
Phoenix TrustedCore(tm) Setup Utility
CPU Type :
Intel (R) Pentium(R) Dual CPU T2310 @ 1.46GHz
CPU Speed :
System BIOS Version: v1.3701
VGA BIOS Version:
SantaRosa 1436
Serial Number:
xxxxxxxxxxxxxxxxxxxxxx
Asset Tag Number:
Produce Name:
Manufacturer Name: Acer
UUID:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
F1 Help Select Item F5/F6 Change Values F9 Setup Defaults
Esc
Exit
Select Menu Enter Select Sub-Menu F10 Save and Exit
IDE1 Model Name :
Hitachi HTS541616J9SA00
ATAPI Model Name :
Optiarc DVD RW AD-7530A
IDE1 Serial Number :
xxxxxxxxxxxxxxxxxxxxxx
1460 MHz
Main Security Boot Exit
Information
System Utilities
Chapter 2