Filter
Top Products
Chapter 3 111
Replacing the Hard Disk Drive Module
NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it.
3. Push the ODD module into the ODD bay as shown. 4. Ensure that the ODD is flush with the chassis and
the screw socket is aligned with the screw socket in
the lower base.
NOTE: Do not insert a screw to secure the ODD. The ODD is secured after replacing the lower cover and
all captive screws are tightened.
1. Insert the HDD in to the carrier. 2. Replace the four screws to secure the carrier.