Filter
Top Products
64 Chapter 3
Disassembling the LCD Module
1. Remove the six screw rubbers as shown.
2. Then remove the six screws fastening the LCD bezel.
3. Detach the LCD bezel from the LCD module carefully.
4. Remove the four screws holding the LCD.
5. Detach the two inverter cable connectors from the inverter board.
6. Disconnect the CCD cable connector from the CCD module.
7. Take out the LCD from the LCD cover.
8. Remove the two screws fastening the left LCD bracket and detach it.
9. Remove the two screws fastening the right LCD bracket and detach it.