Filter
Top Products
EN-12
INSTALLATION
To install the monitor to your host system, please follow the steps as given
below:
Steps
1.1-1Connect Video Cable
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the VGA video cable to the computer.
1-2
a. Make sure both the monitor and computer are powered-OFF.
b. Connect one end of the 24-pin DVI cable to the back of the
monitor and connect the other end to the computer’s port.
3
. Power-ON Monitor and Computer
Power-ON the monitor first, then power-ON the computer.
This
sequence is very
important.
If the monitor still does not function properly, please refer to the
troubleshooting section to diagnose the problem.
1-
Connect the digital cable (only for dual-input models).
Connect the adapter
a Connect the AC cord to the adapter.
b Connect one end of the adapter to the monitor and the other end to
a properly
grounded, AC outlet
.
2.
4.
3
HDMI Cable (Only HDMI-Input Model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the HDMI cable to the computer.
HDMI
DC IN
VGA
DVI
2
HDMI
DVI
DC
VGA