Filter
Top Products
Condential
4-6
P1166 / P1266 / P1266i / P1166P / P1266P
6. Focus test
Procedure - Test equipment: video generator.
- Test signal: analog 1024 x 768@60Hz1024 x 768@60Hz
- Test Pattern: full screen or MEME Sony
Inspection item - Focus check
Criteria - From screen 1.95 M via visual to check the
focus, look at the entire
screen, focus shall be clear, crisp, and sharp
over the entire surface of the display
pattern. (Blur word on one of the corner after
adjustment is acceptable. However, the word
should at least be recognizable.)
7. Color performance
Procedure - Test equipment: video generator.
- Test signal: HDMI 720p, 1080P
- Test Pattern: Master, In focus II or SMPTE RP-
133
* Please refer to 4-2 to get into service mode.
Use 720P & 1080i signal, master pattern to do
HDTV test. Color cannot discolor to purple and
blue.
Inspection item - Check if each color level is well-functioned.
- color saturation
Criteria - Screen appears normal. It should not have any
abnormal condition, such as lines appear on the
screen and so on.
- Color appears normal.
- It is acceptable to have few lines ashing at the
center and on the edge of 1080i image. How-
ever, rest of the image should appears stable.
- RGBW should all appear normal on the screen
and sort from R -G-B-W.
- Color levels should be sufcient and normal.
SMPTE RP-133
InFocus II
/ 64 gray RGBW
Master
MEME Sony
Full screen